EQUIPMENT

Printable Version Available
Mill / Turn
MILL/ TURN
  • Mazak Integrex i 200S, CNC Mill/Turn, main spindle 8”, subspindle 8”, bed 40”, milling spindle 12,000 rpm, 36 tool magazine
  • Mori Seiki NL-2500/700 CNC Lathe, 10” chuck, programmable live tooling and Y axis
  • Mori Seiki NLX-2500/700 CNC Lathe, 10” chuck, programmable live tooling and Y axis
   
 
TURNING CENTERS
  • Mori Seiki CL-25 CNC Lathe, 10” chuck
  • Mori Seiki CL-203 CNC Lathe, 8” chuck
  • Mori Seiki Duraturn 2050 CNC Lathe, 8” chuck
  • Track TRL-2460SX with CNC control, 24” diameter swing, 60” turning length
  • Nardini 16” x 60” engine lathe with digital readout, 5C collet system, assorted tooling Turning Capacity up to 24” dia or 60” long
   
Milling Centers
MILLING CENTERS
  • Kitamura HX400iF horizontal CNC Machining Center, 18 hp, 4th axis rotary table, 29”x24”x24” travel, 16”x16” table, pallet changer, 50 station tool changer, 20,000 rpm, high pressure coolant system
  • Kitamura HX300iF horizontal CNC Machining Center, 18 hp, 4th axis rotary table, 20”x20”x19” travel, 12”x12” table, pallet changer, 40 station tool changer, 20,000 rpm, high pressure coolant system
   
Milling Centers
  • Mori Seiki SV-503/40 vertical CNC Machining Center, 30 hp, 31.5”x20”x20” travel, 43”x23” table, 20 station tool changer, 10,000RPM
  • Mori Seiki SV-500/40 vertical CNC Machining Center, 30 hp, 31.5”x20”x20 travel, 43”x23” table, 20 station tool changer, 10,000RPM, Chip Blaster high pressure coolant system
   
Milling Center
  • Supermax CNC-40 milling machine, 3 hp, 29.5”x15.5”x5” travel, 9”x49” table, flood coolant
  • Supermax YCM-16VS milling machine, 3 hp, 49” table, power feed, power drawbar, digital readout
  • Supermax YCM-16VS milling machine, 3 hp, 49” table, power feed, power drawbar, digital readout
  • Bridgeport Series 1, variable speed 1.5 hp, 42” table, power feed, power drawbar, digital readout
   
Grinders
    Grinders
GRINDERS
  • Okamoto OGM 1220PB III CNC OD Grinder, 12” OD x 20” long
  • Acer Supra 1428 automatic surface grinder with 12”x24” variable fine pole magnetic chuck, flood coolant
  • 612 Harig surface grinder with variable chuck, digital readout, digital opti-dress
  • 612 Harig surface grinder with variable chuck, digital readout, manual opti-dress
  • 618 Harig surface grinder with variable chuck, digital readout
  • (2) Harig 612 surface grinders with magnetic chucks and digital readout
  • (6) Imperial Newbould Grindit model 300 fixture with v-block, magnetic chuck, 5C collet system
  • Harig Center grinding fixture
  • Do-All grind fixture with 3C collet system, centers
   
 
INSPECTION EQUIPMENT
  • Brown & Sharpe Global Classic CNC Coordinate Measuring Machine 20”X 20”Y 20”Z
  • Brown & Sharpe Reflex Coordinate Measuring Machine, 14”X 16”Y 12”Z
  • Keyence LS-7010 MT Laser Micrometer .002-.240 range
  • Sheffield Precisionaire Air Gage
  • OGP 14” optical comparator edge sensing
  • J&L 14” optical comparator 10x-61.5X
  • 13” Mitutoyo height gage
  • 6” Brown & Sharpe height gage
  • Fowler Hi-Cal 300 height gage
  • Mitutoyo SJ-201 Surface finish Profilometer
  • Mitutoyo SJ-310 Surface finish Profilometer
  • Mitutoyo bore gages .240”-10.000”
  • Mitutoyo Tri-Mic bore gages .275”-3.000”
  • Enco Rockwell tester
  • Full complement of surface plates, o.d. mics, i.d. mics, ceramic gage blocks, gage pins, thread gages, indicators, depth mics, calipers, etc.
   
 
SUPPORT EQUIPMENT
  • Hansvedt CS-2 Tradesman EDM with 10”x13” table travel, 8” ram travel, .0001 digital readouts
  • Sunnen MBH-1290-D honing machine and tooling
  • TELESIS Benchmark 320 computerized indent marketing system
  • TELESIS EVC Prostation Laser Engraver
  • WASP barcoding system
  • Armada HA250W automatic band saw
  • (2) Roll-In 14.5” band saw
  • 25 gallon vibrating tumbler
American Made, American Proud